Pro Advanced Waterproofing 32 x 60 Offset Drain Tiled Shower Kit in ABS or PVC
A complete, easy to install Waterproofing Shower Kit system for maintenance-free tiled showers
With amazing grate cover choices and screw-less design
Available in your choice of ABS or PVC drain connection
Pro Advanced Custom Tiled Shower Kit 32 x 60 with Offset Drain
- All the components required to build a fully bonded water tight assembly for tiled showers.
- Includes the highest quality, most innovative and attractive drain system on the market.
- Protects wall cavities against water and vapor penetrations.
- Prefabricated sloped pan eliminates mortar bed, reducing weight and installation time.
- System can use modified thinset for better adhesion and elimination of failure possibilities.
- Install glass tiles with this system where unmodified thinset systems don't allow these materials.
- Membrane tested at 0.07 PERM rating - much lower than required for steam showers!
The video above provide an excellent general guideline for installation. The 32 x 60 installation video shows the general installation techniques for installing a 32 x 60 offset drain kit. The curb installation in the video shows general installation tips for installing optional curb sections. You may build your own curbs and follow the same general guidelines for waterproofing as shown in the video. Some actual steps may vary or additional steps may be required depending on your specific kit.
The Pro Advanced Custom Shower Kit package includes:
-
1 Shower Tray, 32" x 60" (pan) with offset drain
-
Total of 108 SF of Waterproofing Membrane (approx. 39.5" wide x 32' 8" long)
-
1 - 33' x 5" or 6" Waterproofing Joint Strip,
-
1 Pro Advanced Drain in ABS or PVC with selection from 10 stunning grate cover choices
-
1 Grate Puller (Grate is screwless!) and 1 easily accessed integrated hair trap
-
4 Pre-formed Inside corners
-
1 Tube of waterproofing sealant for failsafe membrane to drain-flange bond
-
When Optional Curb is Chosen, Includes 2 Preformed Outside Corners.
Grates:
- Grate size: 3 3/4" x 3 3/4"
- Comes with grate puller to easily lift grate
- Features screw-less design and accommodates integrated hair trap
Polished Chrome
Bright Brass
Black Chrome
Brushed Nickel
Antique Pewter
Polished Copper
Oil Rubbed Bronze
Brushed Bronze
Polished Nickel
Satin NickelOptional Curbs:
| Optional Curb Overlays: (ships in 2 sections) |
 |
Noble Curb Overlays (over 2 by 4s) |
| Optional 4' Solid Curb: |  |
Noble Solid Shower Curb 4' |
Installation
1. Mark Drain Location
2. Cut Drain Hole
3. Test Fit
4. Lay Sections
5. Complete Pan
6. Glue Drain Flange
7. Set Inside Corners
8. Install Transistion Strip
9. Install Wall Membrane
10. Install Floor WP
11. Waterproof Curb
12. Install Outside Corner
13. Expose Drain
14. Seal Drain Flange
15. Set Grate Riser
16. Adjust Flange Subfloor
17. Lock Into Place
18. Ready for Tile!Complete your installation by adding these to your order:
| Seal your grout permanently and prevent mold or mildew from ever growing with: |  |
Grout Admix with Shield Technology |
| Protect your existing tile and other hard surfaces with: |  |
Shield Advanced Antimicrobial Complete System |
Previous Posts
Dural Durabase WP Waterproofing Seam Strips 5 Inch 41 Foot Roll
Dural Durabase-WP WPFXI Inside Corners
Schluter Kerdi Waterproofing Seam Strips 10 Inch Roll
Pro 48 inch Shower Pan for Shower Systems
Dural Durabase WP Waterproofing Seam Strips 7 Inch 33 Foot Roll
ProVa 48 x 48 Tiled Shower Systems Kit
Pro ABS 32 x 60 Offset Drain Shower Waterproofing Kit
Schluter BARA-RW Angular Perimeter Finishing Profiles
Schluter Systems Kerdi Waterproofing Seam Strips 7-1/4 Inch Roll
Dural Durabase WP Waterproofing Seam Strips 7 Inch 16.5 Foot Roll
Trowel for Installing Schluter Kerdi
Pro Advanced waterproofing 48 x 72 Custom Tiled Shower Kit
Pro Joint Strip 5 Inch 82 Foot Roll