Sia Custom Belts in Every Size, Grit and Material
- Sia Swiss-made belts are the best in the industry
- Sia belts of different series can sand wood, aluminum, plastics, varnish, paint, lacquers, glass, cast iron, steel, and even titanium
- For home or industrial use
Search for Belt by Material
1718 siapan
Application
- Wide belt sanding
- Intermediate surface sanding
- Fine surface sanding
- Pad sanding (sanding platen)
- Industrial, long-term sanding of wood based panels
Advantages
- TopTec quality:
- Controlled coating
- Best belt joints
- Dust free sanding process: the antistatic configuration minimizes dust adhesion to the belt, the work piece as well as the sanding machine
- High surface quality
- Excellent surface finish in intermediate and fine sanding
- Smooth backing reduces wear on sanding pad
- Chatter mark free surface finish (belt joint without over-thickness)
- Cost-effective sanding
Materials
- wooden materials
- MDF / chipboard
Structure
- Grit range: P60 - P220
- Backing: g-wt paper
- Bonding: synthetic resin
- Coating: electrostatic closed
- Grit: silicon carbide
Properties
- Finish: Very good
- Stability: High
- Lifetime: Very long
- Removal rate: Very high
1727 siawat fc
Application
- Designed for wet or dry sanding
- Sanding of hard primer filler, paint, lacquers and plastics
- Microfinishing for all ferrous and non-ferrous metals
- Sanding of very high quality surfaces
Advantages
- May be used wet and dry
- High surface quality
- Cutting, good finish
- Can be folded and cut to any desired size
Materials
- aluminium
- ferrous and non-ferrous
- plastics
- body filler
- primer filler
- varnishes and paints
Structure
- Grit: silicon carbide
- Coating: electrostatic closed
- Bonding: resin over resin
- Backing: c-wt paper
- Grit range: P080 - P1200 (excl. P360)
Properties
- Lifetime: Very long
- Stability: Flexible
- Finish: Very good
- Waterproof: Yes
1729 sialac
Application
- Intermediate sanding of UP and PUR varnish systems
- Intermediate sanding of UV varnish systems
- Polishing preparation for high-gloss surfaces
Advantages
- Best surface quality when sanding industrial varnish systems
- Low dust adhesion on the abrasive belt, work piece and machine thanks to the anti-static treatment
- Application-specific optimised belt joints
- Additional stearate coating
- Long lifetime
Materials
- primers
- body filler
- primer filler
- UP and PUR lacquers
- nicrocellulose lacquers
- ultra violet lacquers
- water-based lacquers
Structure
- Grit: silicon carbide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: e-wt paper
- Special coating: stearate
- Grit range: P220 - P800
Properties
- Removal rate: Very high
- Lifetime: Very long
- Stability: Strong
- Finish: Very good
- Clogging: Low
1749 siaral
Application
- Calibrating MDF and chipboard surfaces
- Preparation sanding before veneering or laminating
- Removal of synthetic resin and laminate layers
- Final sanding on transom and high-quality veneers
- Priming preparation of MDF
- Fine sanding of MDFand chipboard surfaces
- Fine sanding of slate and marble pieces
- Coarse to fine sanding of composite materials
Advantages
- Long lifetime when sanding MDF and HDF panels and chipboard surfaces
- Low dust adhesion on the abrasive belt, work piece and machine thanks to the anti-static treatment
- Application-specific optimised belt joints
- Best surface quality when fine sanding MDF, highquality veneer and soft wood
- Perfect finish after fine sanding of soft wood
Materials
- soft wood
- hard wood
- MDF / chipboard
- glass fibre reinforced plastic / composite
- mineral materials
- body filler
- primer filler
- UP and PUR lacquers
- ultra violet lacquers
Structure
- Grit range: P036 - P400
- Backing: f-wt paper
- Bonding: synthetic resin
- Coating: electrostatic closed
- Grit: silicon carbide
Properties
- Finish: Very good
- Stability: Strong
- Lifetime: Very long
- Removal rate: Very high
1820 siamet f
Application
- Surface treatment
- Treatment of ferrous and non-ferrous metals
- Flat grinding of sheets
- Grinding down the melting drops of laser cuttings
- Removal of rust, black scale and contamination
Advantages
- Excellent surface quality in fine grit range
- All-round product for light metal application
- Impact free belt joint
- Ideal grit and paper combination
Materials
- mild steel / carbon steel
- stainless steel / stainless sheets
- titanium
- copper alloys / brass / bronze
- aluminium
- cast iron
- ferrous and non-ferrous
Structure
- Grit: zirconia alumina / semi-friable aluminium oxide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: f-wt paper
- Grit range: P040 - P400
Properties
- Removal rate: High
- Lifetime: Long
- Stability: Medium
- Finish: Very good
- Clogging: Low
1913 siawat fc
Application
- Designed for wet sanding
- Flatting body filler, primer filler and lacquers
- Scuffing of lacquers
- Rectifying top coats (dust inclusions, orange-peel effect)
Advantages
- No reduction of quality after longer soaking time
- No troublesome curling
- Very high aggressiveness
- Can be folded and cut to any desired size
Structure
- Grit: semi-friable, aluminium oxide, silicon carbide
Size coat with active additives - Coating: electrostatic closed
- Bonding: resin over resin
- Backing: c-wt paper
- Grit range: P060 - P2500
- Lifetime: very long
- Stability: flexible, graduated according to application
- Finish: good
- Waterproof: yes
1919 siawood
Application
- For Hand and handmachine Sanding
- Sanding off paint and varnish
- Keying of paint and varnish
- Coarse sanding of solid wood
- Fine sanding of solid wood
- Keying of primers and fillers metal
- Shaped and fine sanding of inner radii
- Flush sanding of edges, edge strips and protrusions
- Calibrating, medium and fine sanding of surfaces
- Medium to fine sanding of solid and veneered surfaces
- Flatting of edges and rabbets
- Keying and dulling of primers
- Intermediate sanding of varnishes
- Final sanding to prepare for polishing
Advantages
- Very high performance in heavy-duty applications
- Robust backing and highstrength grit bonding for long life
- Controlled scattering ensure a perfect surface quality
- Fast and safe change of abrasive with siafast system
- Shape-retaining, temperature and humidityresistant backing
- Latest generation antistatic equipment
- Perfect surfaces thanks to TopTec
- Dust-free process low dust adhesion on the abrasive belt, work piece and machine thanks to the antistatic treatment
- Controlled scattering and perfect surface quality
- Universal all-round product for wood applications
- Low dust adhesion on the abrasive belt, work piece and machine thanks to the anti-static treatment
- Easy and safe to handle
- Universal all-round product for varnish applications
- Suitable for an universal and wide range of applications
- Application-specifically optimised belt joints
Materials
- soft wood
- hard wood
- resinous wood
- wooden materials
- MDF / chipboard
- glass fibre reinforced plastic / composite
- mineral materials
- varnishes and paints
- primers
- body filler
- primer filler
- UP and PUR lacquers
- nicrocellulose lacquers
- ultra violet lacquers
- water-based lacquers
Structure
- Grit range: P036 - P220
- Grit: semi-friable aluminium oxide
- Coating: electrostatic open, electrostatic closed
- Bonding: synthetic resin
- Backing: f-wt paper
- Grit range: P240 - P800
- Grit: silicon carbide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: d-wt paper
- Special coating: stearate
Properties
- Lifetime: Very long
- Stability: Very strong
- Application: Hard
- Removal rate: Very high
- Lifetime: Long
- Stability: Strong
- Clogging: Low
1920 siawood
Application
- Flush sanding of edges, edge strips and protrusions
- Calibrating, medium and fine sanding of surfaces
- Medium to fine sanding of solid and veneered surfaces
- Intermediate sanding of polyester varnishes
- Flatting of edges and rabbets
Advantages
- High surface quality when sanding hard wood
- Low dust adhesion on the abrasive belt, work piece and machine thanks to the anti-static treatment
- Optimized applicationspecific belt joints
- High material removal rate and fine surface all grit ranges
- High surface quality using fine grit sizes
Materials
- hard wood
- wooden materials
- MDF / chipboard
- glass fibre reinforced plastic / composite
- UP and PUR lacquers
Structure
- Grit: semi-friable, aluminium oxide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: f-wt paper
- Grit range: P060 - P400
Properties
- Removal rate: Very high
- Lifetime: Very long
- Stability: Strong
- Finish: Very good
1939 siawood
Application
- Flush sanding of edges, edge strips and protrusions
- Calibrating, medium and fine sanding of surfaces
- Flatting of edges and rabbets
- Medium to fine sanding of solid and veneered surfaces
Advantages
- Ideal for wood that smears or wood containing oil or resin
- Low dust adhesion on the abrasive belt, work piece and machine thanks to the anti-static treatment
- Optimized applicationspecific belt joints
- Excellent finish on solid
- Additional stearate coating to prevent clogging
Materials
- soft wood
- hard wood
- resinous wood
- wooden materials
- mineral materials
- body filler
- primer filler
Structure
- Grit: semi-friable, aluminium oxide
- Coating: electrostatic open
- Bonding: synthetic resin
- Backing: f-wt paper
- Special coating: stearate
- Grit range: P060 - P220
Properties
- Removal rate: Very high
- Lifetime: Very long
- Stability: Strong
- Clogging: Low
2503 siabite y
Application
- Grinding down runners
- Grinding of weld seams on stainless steel
- Grinding of castings and forgings
- Grinding of radii in apparatus manufacture
- General treatment of metallic materials with poor chip removal properties
Advantages
- High removal rate thanks to ceramic grit
- Active additives guarantee cool grinding and virtually no discolouration
- Longer product lifetime
- Lower grinding costs thanks to longer lifetime
Materials
- stainless steel / stainless sheets
- titanium
- copper alloys / brass / bronze
- cast iron
Structure
- Grit: ceramic aluminium oxide / semi friable aluminium oxide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: y-wt cloth, polyester
- Grit range: P036 - P120
2nd size coat with highly active additives
Properties
- Removal rate: Very high
- Lifetime: Very long
- Stability: Very strong
- Application: Hard / aggressive
2510 siabite
Application
- Grinding of burrs and welding seams
- Turbine blades
- Use conditions: hard to soft
- Stationary belt machine grinding on stainless steel, alloys, and high alloys.
- Designed for low to mid pressure applications, dry.
Advantages
- Excellent performance and cool running thanks to highly active grinding agents.
- Active additives guarantee cool grinding and virtually no discolouration
Structure
- Grit: ceramic aluminium oxide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: y-wt polycotton, x-wt polycotton
- Grit range: P050 - P120
2nd size coat with highly active additives
2515 siabite
Application
- Grinding down runners
- Grinding of weld seams
- Grinding of castings and forgings
- General treatment of metallic materials with poor chip removal properties
- Treatment of extremely hard workpiece surfaces
- Designed for high pressure applications, dry.
Advantages
- High removal rate thanks to ceramic grit
- Active additives guarantee cool grinding and virtually no discolouration
- Longer product lifetime
- Lower grinding costs thanks to longer lifetime
Materials
- stainless steel / stainless sheets
- titanium
- copper alloys / brass / bronze
- cast iron
Structure
- Grit: ceramic aluminium oxide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: y-wt cloth
- Grit range: P036 - P080
2nd size coat with highly active additives
Properties
- Removal rate: Very high
- Lifetime: Very long
- Stability: Very strong
- Application: Hard / aggressive
2546 siatur
Application
- Grinding down weld seams on stainless steel
- Finishing of curved surfaces at construction of chemical and apparatus manufacture
- Grinding of surgical instruments
- Grinding of turbine blades, watch cases, cutlery and fittings
Advantages
- High removal rate thanks to ceramic grit
- Active additives guarantee cool grinding with virtually no discolouration of workpieces
- Maximum adaptation to contours and curves
- High performance with materials that have poor chip removal properties
Materials
- stainless steel / stainless sheets
- titanium
- copper alloys / brass / bronze
Structure
- Grit: ceramic aluminium oxide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: jj-wt cloth, cotton
- Grit range: P060 - P320
2nd size coat with highly active additives
Properties
- Removal rate: High
- Lifetime: Very long
- Stability: Very flexible
- Finish: Very good
2707 siawat
Application
- Surface treatment for glass, plastics, and more
- Edge breaking on glass plates
- Designed for wet sanding and grinding
- High suitable for ski sanding
Advantages
- All-round product, specifically for wet grinding
- For stainless sheets requiring a blue colouration
- Highly suitable for cast iron, glass and plastics
Materials
- mild steel / carbon steel
- stainless steel / stainless sheets
- titanium
- copper alloys / brass / bronze
- cast iron
- glass
- stone
- plastics
Structure
- Grit: silicon carbide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: x-wt cloth
- Grit range: P060 - P180
Properties
- Removal rate: High
- Lifetime: Long
- Stability: Strong
- Finish: Very good
- Water-resistant: Yes
- Clogging: Low
2718 siapan z
Application
- Wide belt sanding
- Surface calibrating
- Intermediate surface sanding
- Fine surface sanding
- Drum sanding
- Pad sanding (sanding platen)
- Industrial, long-term sanding of wood based panels
Advantages
- TopTec quality:
- Controlled coating
- Best belt joints
- Dust free sanding process: the antistatic configuration minimizes dust adhesion to the belt, the work piece as well as the sanding machine
- High tear resistance
- High humidity resistance
- Washable
Materials
- wooden materials
- MDF / chipboard
- hard boards (HDF)
- mineral materials
- plastic boards
Structure
- Grit range: P024 - P050
- Backing: z-wt polyester cloth
- Bonding: synthetic resin
- Coating: electrostatic open
- Grit: silicon carbide
- Grit range: P060 - P220
- Backing: z-wt polyester cloth
- Bonding: synthetic resin
- Coating: electrostatic closed
- Grit: silicon carbide
Properties
- Finish: Very good
- Stability: Very high
- Lifetime: Very long
2747 siatur
Application
- Grinding of fittings and tap ware
- Grinding of hardware
- Grinding of musical instruments
Advantages
- This series is ideal for grinding fittings
- Cool cut (additives), hardly any discolouration of workpieces
- The surface quality of the machined workpieces is excellent, particularly on brass and other copper alloys
- Adapts very well to curves
Materials
- stainless steel / stainless sheets
- titanium
- copper alloys / brass / bronze
Structure
- Grit: silicon carbide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: j-wt cloth, cotton, jj-wt cloth, cotton
- Grit range: P060 - P400
(excl. P150)
Size coat with highly active additives
Properties
- Removal rate: High
- Lifetime: Long
- Stability: Flexible / very flexible
- Application: Medium
2800 siaron
Application
- Deburring and edges breaking
- Grinding down aluminium casting seams
- Grinding down plastic protrusions
- Descaling
- Flat grinding of various machine components
Advantages
- Very high edge stability, high initial tearing resistance
- May be used wet or dry
- Backing with very high stability and low elongation
- May be used for all metals
Materials
- mild steel / carbon steel
- stainless steel / stainless sheets
- titanium
- copper alloys / brass / bronze
- aluminium
- cast iron
Structure
- Grit: zirconia alumina, semi-friable aluminium oxide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: y-wt cloth, x-wt cloth
- Grit range: P024 - P400
Properties
- Removal rate: Very high
- Lifetime: Very long
- Stability: Very strong
- Application: Hard / aggressive
- Water-resistant: Yes
- Clogging: Low
2803 siaron
Application
- General treatment of metallic materials with poor chip removal properties
- Treatment of weld seams and joints
- Descaling
Advantages
- Active additives guarantee cool grinding with virtually no discolouration of workpieces
- High edge stability, high initial tearing resistance
- Backing with high stability and low elongation
Materials
- stainless steel / stainless sheets
- titanium
- copper alloys / brass / bronze
Structure
- Grit: zirconia alumina / semi-friable aluminium oxide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: y-wt cloth, x-wt cloth
- Grit range: K050 - K180
2nd size coat with highly active additives
Properties
- Removal rate: High
- Lifetime: Long
- Stability: Strong
- Application: Moderat
2812 siaral x
Application
- Flush sanding of protrusions on cross-grained wood
- Flatting of edges and rabbets
- Coarse sanding of wood based panels and hard wood
- Coarse to fine sanding in parquet and plywood production
- Coarse to fine sanding of glued solid wood panels
Advantages
- Suitable for long periods thanks to very robust backing and optimised grit spreading technology
- Extremely high performance when sanding hard wood with coarse grit sizes
- High surface quality using fine grit sizes
- Application-specifically optimised belt joints
Materials
- soft wood
- hard wood
- wooden materials
- MDF / chipboard
Structure
- Grit: mixed grit types, silicon carbide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: y-wt cloth, cotton, x-wt cloth, cotton
- Grit range: P016 - P220 (excl. P020, P030, P050, P180)
Properties
- Removal rate: Very high
- Stability: Very strong
- Finish: Good
- Clogging: Low
2815 siaron
Application
- General treatment of metallic materials with poor chip removal properties
- Treatment of weld seams and joints
- Descaling
Advantages
- Active additives guarantee cool grinding with virtually no discolouration of workpieces
- Highest edge stability, highest initial tearing resistance
- Backing with highest stability and low elongation
Materials
- titanium
- copper alloys / brass / bronze
Structure
- Grit: zirconia alumina / semi-friable aluminium oxide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: y-wt cloth
- Grit range: P024 - P080
2nd size coat with highly active additives
Properties
- Removal rate: High
- Lifetime: Long
- Stability: Strong
- Application: Moderat
2820 siamet x
Application
- Deburring and edges breaking
- Smooth grinding of welding seams and joints in hard to reach areas
- Keying of soldered and welded points on steel
- Grinding of radii in tool and mould manufacture
- Descaling of steel
Advantages
- High edge stability
- Active additives guarantee cool grinding with virtually no discolouration of workpieces
- Fast, safe and easy disc changing (siafix-discs)
Materials
- mild steel / carbon steel
- copper alloys / brass / bronze
- aluminium
- cast iron
Structure
- Grit: zirconia alumina / semi-friable aluminium oxide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: x-wt cloth, cotton
- Grit range: P024 - P400
Size coat with active additives
Properties
- Removal rate: High
- Lifetime: Long
- Stability: Medium
- Finish: Good
- Application: Hard
2829 siaron y
Application
- Grinding down runners
- Treatment of welding seams
- Performance-oriented stock removal
- Treatment of castings and forgings
- General dressing work of aluminium
Advantages
- High edge stability, high initial tearing resistance
- Backing with high stability and low elongation
- Active additives guarantee cool grinding with virtually no discolouration of workpieces
Materials
- mild steel / carbon steel
- aluminium
Structure
- Grit: zirconia alumina / semi-friable aluminium oxide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: y-wt cloth, polyester
- Grit range: K024 - K120
Size coat with active additives
Properties
- Removal rate: Very high
- Lifetime: Very long
- Stability: Very strong
- Application: Hard / aggressive
2920 siawood
Application
- Flush sanding of edges and rabbets
- Fine sanding of surfaces and edges
- Coarse to fine sanding in plywood production
- Coarse to fine sanding of glued soft wood boards
- Sanding off old varnish and paint
Advantages
- Perfect surfaces thanks TopTec
- Dust-free process low dust adhesion on the abrasive belt, work piece and machine thanks to the anti-static treatment
- Application-specifically optimised belt joints
- Controlled scattering and perfect surface quality
- Suitable for long life-time thanks to the robust backing
- High stock removal rates in coarse grit sizes when sanding soft and hard wood
Materials
- soft wood
- hard wood
- resinous wood
- wooden materials
- glass fibre reinforced plastic / composite
- mineral materials
- varnishes and paints
- body filler
- primer filler
Structure
- Grit: semi-friable aluminium oxide
- Coating: mechanical open, electrostatic open, electrostatic closed
- Bonding: synthetic resin
- Backing: y-wt cloth, cotton, x-wt cloth, cotton
- Grit range: P016 - P320 (excl. P020, P280)
Properties
- Removal rate: Very high
- Lifetime: Long
- Stability: Very strong
- Finish: Good
- Clogging: Low
2925 sialoX
Application
- Deburring and edges breaking
- Smooth grinding of weld seams
- Treatment of ferrous and non-ferrous metals
- Flat grinding of sheets
- Grinding down plastic protrusions
Advantages
- High edge stability, high initial tearing resistance
- Cutting product, suitable for all metallic materials
- Active additives guarantee cool grinding with virtually no discolouration of workpieces
- May be used wet or dry
- Long service life thanks to robust backing
Materials
- mild steel / carbon steel
- stainless steel / stainless sheets
- copper alloys / brass / bronze
- aluminium
- ferrous and non-ferrous
Structure
- Grit: aluminium oxide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: y-wt cloth, mixed fabric, x-wt cloth, mixed fabric, x-wt cloth, cotton
- Grit range: P024 - P400
Size coat with active additives
Properties
- Removal rate: High
- Lifetime: Long
- Stability: Medium
- Water-resistant: Yes
2928 siaral
Application
- More agressive than 2920
- Flush sanding of edges and rabbets
- Fine sanding of surfaces and edges
- Coarse to fine sanding in plywood production
- Coarse to fine sanding of glued soft/hardwood boards
- Sanding off old varnish and paint
- Stationary belt machine sanding on hard and soft woods, steel and composities
Advantages
- Very good performance and aggressive cut.
Structure
- Grit: aluminium oxide
- Coating: electrostatic semi-open
- Bonding: synthetic resin
- Backing: x-wt cotton
- Grit range: P036 - P120
2933 siatur
Application
- Coarse to fine sanding on curves and profiles
- Sanding off old varnish
- Flush sanding of edges, rabbets and protrusions
- Pre- and post-treatment of surfaces and curves
- Particularly suitable for pneumatic rolls
Advantages
- Perfect surfaces thanksto TopTec
- High dimensional accuracy for profile belt sanding
- Dust-free process low dust adhesion on the abrasive belt, work piece and machine thanks to the anti-static treatment curves and profiles
- Application-specifically optimised belt joints
- Long life-time when used on soft and resinous woods
- Controlled scattering and optimised surface quality
- Adaptable to contours, curves and profiles
Materials
- soft wood
- hard wood
- resinous wood
- wooden materials
- glass fibre reinforced plastic / composite
- mineral materials
- body filler
- primer filler
Structure
- Grit: semi-friable, aluminium oxide
- Coating: electrostatic, open
- Bonding: synthetic resin
- Backing: j-wt cloth, cotton
- Grit range: P060 - P220
Properties
- Removal rate: High
- Lifetime: Very long
- Stability: Flexible
- Finish: Good
- Clogging: Low
2936 siatur jj
Application
- Shaped and fine sanding of profiles and contours
- Intermediate sanding of curves and profiles
- Suitable for pneumatic rolls
- Particularly suitable for sanding brushes
Advantages
- Perfect suitable for manual sanding of turned work pieces
- Very adaptable to contours, curves and profiles
- Can be torn to any desired dimensions
- High dimensional accuracy for profile belt sanding
Materials
- soft wood
- hard wood
- resinous wood
- wooden materials
- MDF / chipboard
- glass fibre reinforced plastic / composite
- mineral materials
- primers
- body filler
- primer filler
- UP and PUR lacquers
- nicrocellulose lacquers
- ultra violet lacquers
- water-based lacquers
Structure
- Grit: semi-friable aluminium oxide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: jj-wt cloth, cotton
- Grit range: P060 - P320
Properties
- Removal rate: High
- Lifetime: Very long
- Stability: Very flexible
- Finish: Very good
2945 siatur j
Application
- Grinding of mountings
- Grinding of turbine blades
- Grinding of surgical instruments
- Grinding of watch cases
Advantages
- Adapts well to curves
- Excellent surface quality for workpieces
- Active additives guarantee cool grinding with virtually no discolouration of workpieces
- High performance with materials that have poor chip removal properties
Materials
- mild steel / carbon steel
- stainless steel / stainless sheets
- titanium
- copper alloys / brass / bronze
- aluminium
- cast iron
Structure
- Grit: semi-friable aluminium oxide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: j-wt cloth, cotton
- Grit range: P060 - P400
Size coat with highly active additives
Properties
- Removal rate: High
- Lifetime: Long
- Stability: Flexible
- Finish: Good
- Clogging: Low
2946 siatur jj
Application
- Grinding of mountings
- Grinding of turbine blades
- Grinding of surgical instruments
- Grinding of watch cases
Advantages
- Adapts very well to curves and contours
- Excellent surface quality for workpieces
- Active additives guarantee cool grinding with virtually no discolouration of workpieces
- High performance with materials that have poor chip removal properties
Materials
- mild steel / carbon steel
- stainless steel / stainless sheets
- titanium
- copper alloys / brass / bronze
- aluminium
- cast iron
Structure
- Grit: semi-friable aluminium oxide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: jj-wt cloth, cotton
- Grit range: P060 - P600
- : Size coat with highly active additives
Properties
- Removal rate: High
- Lifetime: Long
- Stability: Very flexible
- Finish: Good
- Clogging: Low
2948 siatur jj
Application
- Grinding of surgical instruments and implants
- Grinding of turbine blades
- Grinding of knives
- Grinding of cutlery
Advantages
- Special aluminium oxide for stainless steel
- Active agents guarantee cool grinding and virtually no discoloration of workpieces
- Adapts very well to curves and contours
Materials
- stainless steel / stainless sheets
Structure
- Grit: aluminium oxide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: jj-wt-cloth, cotton
- Grit range: P080 - P120, P180, P240 - P400, P600
2nd size coat with highly active agents
Properties
- Removal rate: High
- Stability: Very flexible
- Lifetime: Long
- Finish: Very good
- Application: Medium
2951 siatur h
Application
- Medium to fine sanding of curves and profiles
- Keying of primers and fillers
- Intermediate sanding of varnish on curves and profiles
- Suitable for sanding brushes
Advantages
- Suitable for an universal and wide range of applications can be torn to any desired dimensions
- High dimensional accuracy for profile belt sanding
- Extremely adaptable to contours, curves and profiles
- Application-specifically optimised belt joints
Materials
- soft wood
- hard wood
- resinous wood
- wooden materials
- MDF / chipboard
- glass fibre reinforced plastic / composite
- mineral materials
- primers
- body filler
- primer filler
- UP and PUR lacquers
- nicrocellulose lacquers
- ultra violet lacquers
- water-based lacquers
Structure
- Grit: semi-friable aluminium oxide
- Coating: electrostatic closed
- Bonding: synthetic resin
- Backing: h-wt cloth, cotton
- Grit range: P040 - P600 (excl. P050, P500
Properties
- Removal rate: High
- Lifetime: Long
- Stability: Extremely flexible
- Finish: Very good
Previous Posts
Mercer 11-7/8 x 29-1/2 Galaxy BD12 Zirconia Floor Sanding Belt
Bosch 1-1/2 x 12 Inch Sanding Belts Grits 40 - 240
Mercer 7-7/8x29-1/2 Inch Hummel Premium Zirconia Floor Sanding Belt ea
Mercer 8" x 19" Clarke Silicon Carbide Floor Sanding Belt box of 10 Ea
Sia Firm Wet or Dry Hook Loop Hand Sanding Block 2 3/4 x 5 Inch
Sia Hook Loop Polishing Backup Pad 3 1/2 Inch
Sia 2915 Siarol Large Cloth Sheets 18 x 22 Inch 120 Grit
Norton A275 NorGrip Body File Sheets Grits 80 - 220
Carborundum Carbo Gold PSA Coarse Discs 8 Inch Grits 36 - 80
Sia 1960 Siarexx Cut Hook Loop Discs 5 Inch 9 Hole 150 Grit
Carborundum Carbo Gold Blank Discs 6 Inch Grits 80 - 320
Autonet 6 Inch Mesh Grip 80-800 Grit Sanding Discs
Sia 2928 Siaral Wide Cloth Belt Many Sizes Grits 40 - 120
Mirka 9 x 11 Waterproof Finishing Sheets 180-2500 Grit Box of 50