Dural Durondell Closed Quarter Round Inside Corners Anodized Aluminum
Durondell Ceramic Tiles Finishing Profiles
Corners for Durondell profiles wall and floor
Made in Germany
Height: Choose from menu
Material:
Anodized Aluminum – available in gold and silver
Powder coated Aluminum – available in white, beige and silver gray
Please choose profile height from pull-down menu.
Application:
DURONDELL quarter round profiles from Dural were developed as a handsome edging profile for the corners of external walls. They are smoothly rounded and available in a variety of materials. Aside from their protective function, they can also be used for attractive design purposes. They are also suitable for use as a covering as skirting for tiled or carpeted parquet or natural stone floors. High-quality formed pieces are available for joining profile sections together.
Properties:
DURONDELL aluminum anodized and aluminum powder-coated profiles are specially treated so that their surfaces are not usually likely to change. Visible surfaces must still be protected from cement materials. Items that scratch or scrape the profiles may cause damage.
Installation:
- DURONDELL profiles should be chosen to match the thickness of the tiles.
- Tile adhesive should be applied around the junction using a serrated trowel. At outside corners of walls, complete the tiling of the walls first.
- Press the DURONDELL profile into the adhesive bed and align it.
- Spread mortar over the entire surface of the joint.
- Press in tiles firmly and align them so that they are flush with the top edge of the profile. Lay the tiles without leaving any gaps.
- Allow a joint of 2-3 mm (5/64†– 1/8â€) around the profile itself.
- Then fill the space between the tiles and the profile with grout.
Maintenance:
DURONDELL profiles do not require any special maintenance. If they become dirty, they can be simply cleaned with conventional cleaning agents. Cleaning agents should be free of hydrochloric and hydrofluoric acid and should not contain abrasives. Layers of oxidation on brass or aluminum profiles can be removed with brass polish, though it is not possible to eliminate such oxidation on a permanent basis. Cleaning agents should be free of hydrochloric and hydrofluoric acid and should not contain abrasives.
Previous Posts
Inside 3-Way Corner for Schluter DILEX-HKS
Outside Corner for Schluter RONDEC - Aluminum
Outside Corner for Schluter RONDEC - Stainless Steel
Mark E Quick-Pitch Universal Any Drain Size Center Ring
Outside Corner for Schluter BARA-RTP
Dural Duralis Listello Deco Titanium Anodized Aluminum Profiles
Dural Durosol 5 mil Square Edge Profile Brass Chrome Plated
Schluter DILEX-MOP Screed Movement Joint Profiles
Mark E Quick-Pitch Extension Float Sticks
Dural Duralis Listello Deco Wood Insert Profiles 1 Inch wide
Schluter TREP-E Anti-Slip Stainless Steel Stair Nosing Profiles
Schluter RONDEC-DB Anodized Aluminum Decorative Profiles
Inside 2-Way Corner for Schluter DILEX-EHK
Schluter DILEX-EHK Stainless Steel Cove-Shaped Corner Profiles