Schluter RENO-TK Tile Edge Protection / Floor Transition Profiles

• Designed to provide smooth transition from tile coverings to floor coverings at lower elevations, typically carpet.
• 2.5 m (8' 2-1/2") Length;6 mm-12.5 mm (1/4"-1/2") Heights are available
• Available in Stainless Steel, and Anodized Aluminum.

Schluter RENO-TK Floor Transition Profiles

Application and Function

Schluter-RENO-TK is designed to provide a smooth transition from tile coverings to floor coverings at lower elevations, typically carpet.

The profile is available in stainless steel, solid brass, and anodized aluminum. Schluter-RENO-TK features a trapezoid-perforated anchoring leg, which is secured in the mortar bond coat beneath the tile, and a sloped surface to eliminate trip hazards and protect the tile edges. The 1/4" (6 mm) channel beneath the sloped flange of the profile hides and protects the cut edge of lower adjoining surface coverings.

All sizes of the Schluter-RENO-TK are compliant with the Americans with Disabilities Act (ADA). Schluter-RENO-TK, in anodized aluminum sizes 5/16" (8 mm) and larger, features an integrated joint spacer that establishes a defined joint cavity between the tile and the profile. Schluter-RENO-TK, in solid brass and stainless steel, does not feature an integrated joint spacer.

The anchoring leg of Schluter-RENO-TK, in solid brass and anodized aluminum from size 60 to 100, is available with a special radius perforation "R" so that the profile can be used to form curves.

Available Sizes and Materials

Installation

1. Select Schluter-RENO-TK according to tile thickness.
2. Using a notched trowel, apply thin-set mortar to the area where the profile is to be placed.
3. Press the perforated anchoring leg of the profile into the mortar and align.
4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.
5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.
6. For solid brass or aluminum, set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16 1/8 (1.5 3 mm). For stainless steel, leave a space of approximately 1/16" - 1/8" (1.5 - 3 mm) between the tile and the profile.
7. Fill the joint completely with grout or setting material.
8. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials and grouts must be removed immediately, especially from anodized aluminum surfaces.

Material

Schluter-RENO-TK is available in stainless steel, solid brass, and anodized aluminum.

In special cases, the suitability of a proposed type of material must be verified based on the anticipated chemical, mechanical, and/or other stresses.

Schluter-RENO-TK, in stainless steel, is roll-formed using 304 (1.4301 = V2A) stainless steel. Therefore, the profiles contour differs slightly from those made of extruded brass or aluminum. The profile can sustain high mechanical stresses and is especially well suited for applications requiring resistance against chemicals and acids; for example, in the food industry, breweries, dairies, commercial kitchens, public swimming pools, and hospitals.

Schluter-RENO-TK, in solid brass, is capable of withstanding high mechanical stresses and is resistant to most chemicals encountered in tiled environments. Solid brass that is exposed to air will oxidize, resulting in a natural patina. If exposed to moisture or aggressive substances, heavy oxidation and spotting may occur.

Schluter-RENO-TK, in anodized aluminum, must be tested to verify its suitability if chemical exposure is expected. Cementitious materials, in conjunction with moisture, become alkaline. Since aluminum is sensitive to alkaline substances, exposure to the alkali (depending on the concentration and duration of exposure) may result in corrosion (aluminum hydroxide formation). Therefore, it is important to remove mortar or grout residue from visible surfaces. In addition, ensure that the profile is solidly embedded in the setting material and that all cavities are filled to prevent the collection of alkaline water. The anodized surface layer retains a uniform appearance during normal use, but must be protected against abrasion.

Maintenance

Schluter-RENO-TK requires no special maintenance or care and is resistant to mold and fungi. Clean profile using common household cleaning agents.

Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydrochloric and hydrofluoric acid. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.

Oxidation films on exposed solid brass can be removed by using a conventional polishing agent, but will form again.

In the case of anodized aluminum, do not use abrasive cleaning agents. Damage to the anodized layer can be repaired by applying varnish.