Schluter RENO-U Tile Edge Protection / Floor Transition Profiles
- Designed to provide a smooth transition from tile coverings to floor coverings at lower elevations.
- 2.5 m (8' 2-1/2") Length; 3.5 mm-20 mm (1/8"-3/4") Heights are available
- Available in Stainless steel, solid brass and Anodized Aluminum.
Schluter RENO-U Tile Edge Protection / Floor Transition Profiles
Application and Function
Schluter-RENO-U is designed to provide a smooth transition between tile coverings and floor coverings at lower elevations or finished concrete.
The profile is available in stainless steel, solid brass, anodized aluminum and Tuscan color-coated aluminum. Schluter-RENO-U features a trapezoid-perforated anchoring leg, which is secured in the mortar bond coat beneath the tile, and a sloped surface (approximately 25) that eliminates trip hazards and protects tile edges.
The leading edge of the profile abuts the lower surface covering, typically VCT. Schluter-RENO-U, in solid brass, and anodized aluminum features an integrated joint spacer that establishes a defined joint cavity between the tile and the profile. Schluter-RENO-U, in stainless steel, is roll-formed and does not feature an integrated joint spacer.
In installations where the leading edge abuts a lower surface covering, all sizes of Schluter-RENO-U, except the 3/4" (20 mm) and 11/16" (17.5 mm), are compliant with the Americans with Disabilities Act (ADA).
In installations where the leading edge rests on top of the lower floor covering, the 3/4" (20 mm), 11/16" (17.5 mm), and 9/16" (15 mm) sizes are not ADA compliant.
Available Sizes and Materials
| Material | H = Tile Thickness | |||||
|---|---|---|---|---|---|---|
| 5/16" - 8 mm | 3/8" - 10 mm | 1/2" - 12.5 mm | 9/16" - 15 mm | 11/16" - 17.5 mm | 3/4" - 20 mm | |
| Item Number | ||||||
| Stainless Steel 304 (1.4301 = V2A) (E) | EU80 | EU100 | EU125 | EU150 | EU175 | EU200 |
| Brushed stainless Steel 304 (1.4301 = V2A) (EB) | EBU80 | EBU100 | EBU125 | EBU150 | EBU175 | EBU200 |
| Solid brass (M) | MU80 | MU100 | MU125 | MU150 | MU175 | MU200 |
| Satin anodized aluminum (AE) | AEU80 | AEU100 | AEU125 | AEU150 | AEU175 | - |
| Bright chrome anodized aluminum (ACB) | AU80ACB | AU100ACB | AU125ACB | - | - | - |
| Satin nickel anodized aluminum (AT) | AU80AT | AU100AT | AU125AT | - | - | - |
| Brushed nickel anodized aluminum (ATGB) | AU80ATGB | AU100ATGB | AU125ATGB | - | - | - |
| Satin copper/bronze anodized aluminum (AK) | AU80AK | AU100AK | AU125AK | - | - | - |
| Brushed copper/bronze anodized aluminum (AKGB) | AU80AKGB | AU100AKGB | AU125AKGB | - | - | - |
| Brushed antique bronze anodized aluminum (ABGB) | AU80ABGB | AU100ABGB | AU125ABGB | - | - | - |
| Satin brass anodized aluminum (AM) | AU80AM | AU100AM | AU125AM | - | - | - |
| Bright brass anodized aluminum (AMB) | AU80AMB | AU100AMB | AU125AMB | - | - | - |
Installation
- Select Schluter-RENO-U according to tile thickness. Fill the cavity beneath the sloped section of the profile with thin-set mortar.
- Using a notched trowel, apply thin-set mortar to the area where the profile is to be placed.
- Press the perforated anchoring leg of the profile into the mortar and align.
- Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.
- Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approximately 1/32" (1 mm) lower.
- For solid brass or aluminum, set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16 1/8 (1.5 3 mm). For stainless steel, leave a space of approximately 1/16" - 1/8" (1.5 - 3 mm) between the tile and the profile.
- Fill the joint completely with grout or setting material.
- Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials and grouts must be removed immediately, especially from anodized aluminum surfaces.
Material
Schluter-RENO-U is available in stainless steel, solid brass, and anodized aluminum.
In special cases, the suitability of a proposed type of material must be verified based on the anticipated chemical, mechanical, and/or other stresses.
Schluter-RENO-U, in stainless steel, is roll-formed using 304 (1.4301 = V2A) stainless steel. Therefore, the profiles contour differs slightly from those made of extruded brass or aluminum. The profile can sustain high mechanical stresses and is especially well suited for applications requiring resistance against chemicals and acids; for example, in the food industry, breweries, dairies, commercial kitchens, public swimming pools, and hospitals.
Schluter-RENO-U, in solid brass, is capable of withstanding high mechanical stresses and is resistant to most chemicals encountered in tiled environments. Solid brass that is exposed to air will oxidize, resulting in a natural patina. If exposed to moisture or aggressive substances, heavy oxidation and spotting may occur.
Schluter-RENO-U, in anodized aluminum, must be tested to verify its suitability if chemical exposure is expected. Cementitious materials, in conjunction with moisture, become alkaline. Since aluminum is sensitive to alkaline substances, exposure to the alkali (depending on the concentration and duration of exposure) may result in corrosion (aluminum hydroxide formation). Therefore, it is important to remove mortar or grout residue from visible surfaces. In addition, ensure that the profile is solidly embedded in the setting material and that all cavities are filled to prevent the collection of alkaline water. The anodized surface layer retains a uniform appearance during normal use, but must be protected against abrasion.
Maintenance
Schluter-RENO-U requires no special maintenance and is resistant to mold and fungi. Clean profile using common household cleaning agents.
Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydrochloric and hydrofluoric acid. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.
Oxidation films on exposed solid brass can be removed by using a conventional polishing agent, but will form again.
In the case of anodized aluminum and tuscan color-coated aluminum do not use abrasive cleaning agents. Damage to the anodized layer can be repaired by applying varnish.
Previous Posts
Inside Corner for Schluter RONDEC - Aluminum
Dural Durabord Round Edge Profile PVC Marble Gray
Sink Corner for Schluter RONDEC - Anodized Aluminum
Prova Flex Tile Underlayment per SF
Dural Duraplus Box Section Transition Profiles Aluminum Natural
Dural Durosol Square Edge Profile Stainless Steel Grade 304 V2A Matte
Mark E StringA-Level Wall Tile Installation Replacement Bubbles
Dural Durabord Round Edge Profile PVC Marble White
Schluter TREP-EK Stainless Steel Anti-Slip Stair Nosing Profiles
Dural Durosol Square Edge Profile Stainless Steel Grade 316 V4A Matte
Dural Durondell Closed Quarter Round Profiles Silver Anodized Aluminum
Schluter RENO-TK Tile Edge Protection / Floor Transition Profiles
Schluter DITRA-HEAT-E-RS Programmable Thermostat
Schluter DILEX-MP Screed Movement Joint Profiles